Multiband 3D 10-20 mm, 6m
€13.80
Available, delivery time: 1 week
- Einfache Verarbeitung
- Selbstklebend
- Temperaturbeständig von -30°C bis 90°C
- Hohe Alterungs- und Witterungsbeständigkeit
Product information "Multiband 3D 10-20 mm, 6m"
Our multifunctional tape:
The DE & BG DiCHT Multiband 3D 10-20 mm, 6m is a new specially impregnated pre-compressed multi-functional tape
for air and driving rain sealing as well as insulation of window movement joints according to the principle "inside tighter than outside".Room side (inside):
Insulation level:
Weather side (outside):
Consistent qualities guaranteed by regular external and internal monitoring tested by BBS Institut für Bauphysik Wolfenbüttel, ift Risenheim, MPA Bau Hanover
Airtight according to DIN 18542 BG R (ÖNORM B 5320)
Inside is marked in colour
Fire protection class B1 according to DIN 4102-1
Heat and sound insulating
Very good sound insulation values (59 dB)
Impervious to driving rain ≥ 600 Pa according to DIN 18542 BG 1
permanent joint drying
Compatible with adjacent building materials according to DIN 18542 BG 1
Adapts to unevenness in the joint and fills voids Usually compatible with paint, but must be tested
Individual roll marking with usability information for the respective joint width
To avoid soiling or unwanted expansion of the tapes, the individual rolls can be shrink-wrapped in foil.
Solvent-free, no hazardous material
10-year functional guarantee according to manufacturer's conditions*
Storage time: 1 year, dry and in original packaging at < 20° C
* The properties are partly dependent on the degree of compression of the tape.
Colour / delivery form- black (inside marked in colour)
- pre-compressed on roll
YouTube
| Colour: | black |
|---|---|
| Joint area: | 10-20 mm |
| Length: | 6 m |
| Width: | 30 mm |
We are aware of our responsibility towards our customers and partners and attach great importance to a trusting and long-term co-operation. The needs and requirements of our customers are always at the centre of everything we do.
With our expertise and commitment, we ensure that our customers achieve their goals. Whether it's standard products or customised special solutions, we ensure that our customers receive the best solutions for their specific requirements.
Our employees are our greatest asset. Their motivation, expertise and willingness to constantly break new ground are crucial to our success. We encourage their development and support them in realising their full potential.
We look forward to the coming years and are excited about the new challenges and opportunities they will bring. We look to the future with confidence and drive and look forward to continuing to be a reliable partner for our customers.
Since 1990 DRG - your partner for sealing and bonding.
DRG Dicht- und Klebetechnik GmbH
Höcken 119
A-5212Schneegattern
E-mail:office@drg.at
Login
Further offers
Content: 4.5 Metre (€2.53 / 1 Metre)
The joint sealing tape 10/2-3 mm, black, 12.5 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:10mmJoint area:2-3mmRoll length:12,5 mmaximum decompressed approx. 8 mm
Content: 12.5 Metre (€0.11 / 1 Metre)
This joint sealing tape is very versatile and ideal for various construction and renovation projects. It is suitable for exterior and interior use and can be used in a wide range of applications, including window construction, interior finishing, façade construction (including with natural stone), external thermal insulation composite systems (ETICS), timber frame construction, timber and metal construction, prefabricated construction, container construction, noise protection construction and roof construction. The tape is pre-compressed and supplied on a roll, which makes it easier to handle. It has a width of 11 mm and is suitable for joints from 3 to 7 mm. The roll has a length of 4.4 metres and the tape can be decompressed to a maximum of approx. 28 mm. The colour of the tape is black, which gives it a clean and professional appearance. In addition to its primary function as a seal against wind, dust and splash water, it also has sound and heat insulating properties. This can help to reduce energy costs and preserve the building fabric. The tape complies with DIN 18542 BG1, a standard for joint sealing tapes that guarantees their quality and performance. It is made of impregnated foam, a material known for its excellent sealing and insulating properties.
Content: 4.4 Metre (€0.45 / 1 Metre)
The joint sealing tape 15/5-15 mm, black, 4.5 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour:blackCutting width:15mmJoint area:5-15mmRoll length:4,5 mmaximum decompressed approx. 42 mm
Content: 4.5 Metre (€0.53 / 1 Metre)
Joint sealing tape 20/9-20 mm, black, 4.5 m Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint range:9-20mmRoll length:4,5 mmaximum decompressed approx. 48 mm
Content: 3.3 Metre (€1.55 / 1 Metre)
The joint sealing tape 166/2-3 mm, black, 12.5 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a roll Colour:blackCutting width:166mmJoint area:2-3mmRoll length:12,5 mmaximum decompressed approx. 8 mm
The joint sealing tape 20/10-18 mm, 4.5 m, black is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:10-18mmRoll length: 4.5 mmaximum decompressed approx. 48 mm
Content: 4.5 Metre (€1.13 / 1 Metre)
The joint sealing tape 20/10-20 mm, black, 4.5 mist to DIN 18542 BG1 is a joint sealing tape made of impregnated foam. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:10-20mmRoll length:4,5 mmaximum decompressed approx. 48 mm
Content: 4.5 Metre (€1.13 / 1 Metre)
The joint sealing tape 20/4-9 mm, black, 8 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a roll Colour: black Cutting width:20mm Joint area:4-9mm Roll length: 8 m maximum decompressed approx. 23 mm
Content: 8 Metre (€1.06 / 1 Metre)
The joint sealing tape 20/4-9 mm, black, 8 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a roll Colour: black Cutting width:20mm Joint area:4-9mm Roll length: 8 m maximum decompressed approx. 23 mm
Content: 8 Metre (€0.83 / 1 Metre)
Joint sealing tape 20/5-10 mm, black, 14 m Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:5-10mmRoll length: 14 mmaximum decompressed approx. 28 mm
Content: 14 Metre (€2.01 / 1 Metre)
Joint sealing tape 20/5-10 mm, black, 14 m Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:5-10mmRoll length: 14 mmaximum decompressed approx. 28 mm
Content: 14 Metre (€0.96 / 1 Metre)
Joint sealing tape 20/5-10 mm, black, 14 m Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:5-10mmRoll length: 14 mmaximum decompressed approx. 28 mm
Content: 14 Metre (€1.10 / 1 Metre)
The joint sealing tape 20/5-12 mm, black, 4.3 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint range:5-12mmRoll length:4,3 mmaximum decompressed approx. 37 mm
Content: 4.3 Metre (€0.93 / 1 Metre)
The joint sealing tape 20/6-15 mm, black, 4.3 mist to DIN 18542 BG1 is a joint sealing tape made of impregnated foam. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:6-15mmRoll length:4,3 mmaximum decompressed approx. 42 mm
Content: 4.3 Metre (€0.95 / 1 Metre)
The joint sealing tape 20/7-12 mm, black, 4.3 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:7-12mmRoll length:4,3 mmaximum decompressed approx. 37 mm
Content: 4.3 Metre (€0.70 / 1 Metre)
The joint sealing tape 20/7-14 mm, black, 4.3 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:7-14mmRoll length:4,3 mmaximum decompressed approx. 42 mm
Content: 4.3 Metre (€0.70 / 1 Metre)
The joint sealing tape 20/7-15 mm, black, 6 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:7-15mmRoll length: 6 mmaximum decompressed approx. 42 mm
Content: 6 Metre (€0.95 / 1 Metre)
The joint sealing tape 20/7-16 mm, grey, 3.3 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour:greyCutting width:20mmJoint area:7-16mmRoll length:3,3 mmaximum decompressed approx. 42 mm
Content: 3.3 Metre (€0.94 / 1 Metre)
The joint sealing tape 20/8-15 mm, black, 3.3 m is a joint sealing tape made of impregnated foam in accordance with DIN 18542 BG1. It is used for primary sealing of directly weathered joints and connections. In addition to sealing against wind, dust and splash water, it is also sound and heat insulating. This immediately reduces energy costs and preserves the value of the building fabric. Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, half-timbered construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:20mmJoint area:8-15mmRoll length:3,3 mmaximum decompressed approx. 42 mm
Content: 3.3 Metre (€0.94 / 1 Metre)
Joint sealing tape 25/10-18 mm, black, 4.5m Areas of application: Window construction, interior fittings Facade construction (also natural stone) ETICS, timber frame construction, timber and metal construction Prefabricated construction, container construction, noise protection construction, roof construction (e.g. windproof connection of foils) and much more. Delivery form: pre-compressed on a rollColour: blackCutting width:25mmJoint area:10-18mmRoll length:4,5mmaximum decompressed approx. 48 mm
Content: 4.5 Metre (€1.42 / 1 Metre)