Ramsauer 130 Alkoxy 310 ml
such as 130 Alkoxy, as it does not give off any unpleasant odours and therefore does not affect the well-being of those present. Regardless of the specific application, 130 Alkoxy is also extremely compatible with most building materials, which means that the possible uses are almost limitless. Whether glass, metal, wood, plastic or stone - 130 Alkoxy guarantees a reliable and durable seal. Thanks to its high UV and weather resistance, the sealant retains its elasticity and adhesive strength even when exposed to the open air for long periods of time, providing lasting protection against moisture and mould growth. The easy application of 130 Alkoxy also enables quick and efficient application, even for inexperienced DIY enthusiasts. The consistency of the sealant enables precise working and ensures even distribution on the surface to be grouted. The Ramsauer 130 Alkoxy 310 ml therefore offers high performance and flexibility, making it the ideal choice for professional craftsmen and ambitious DIY enthusiasts alike.
Content: 0.31 Litres (€30.97 / 1 Litres)
Ramsauer 130 Alkoxy 310 ml
such as 130 Alkoxy, as it does not give off any unpleasant odours and therefore does not affect the well-being of those present. Regardless of the specific application, 130 Alkoxy is also extremely compatible with most building materials, which means that the possible uses are almost limitless. Whether glass, metal, wood, plastic or stone - 130 Alkoxy guarantees a reliable and durable seal. Thanks to its high UV and weather resistance, the sealant retains its elasticity and adhesive strength even when exposed to the open air for long periods of time, providing lasting protection against moisture and mould growth. The easy application of 130 Alkoxy also enables quick and efficient application, even for inexperienced DIY enthusiasts. The consistency of the sealant enables precise working and ensures even distribution on the surface to be grouted. The Ramsauer 130 Alkoxy 310 ml therefore offers high performance and flexibility, making it the ideal choice for professional craftsmen and ambitious DIY enthusiasts alike.
Content: 0.31 Litres (€30.97 / 1 Litres)
Ramsauer 131 MULTIFLEX, anthracite grey RAL 7016, 310 ml
Ramsauer 131 MULTIFLEX, anthracite grey RAL 7016, 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with VSG foils (PVB). Please consult our application technology department for cast resins and in combination with insulating glass. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, anthracite grey RAL 7016, 310 ml is to be applied evenly and bubble-free into the joint within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks that have formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€28.39 / 1 Piece)
Ramsauer 131 MULTIFLEX, black , 310 ml
Ramsauer 131 MULTIFLEX, black , 310 ml is suitable for sealing toughened and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB), in case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, black, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€28.39 / 1 Piece)
Ramsauer 131 MULTIFLEX, bronce , 310 ml
Ramsauer 131 MULTIFLEX, bronce , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB). In case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, bronce , 310 ml must be applied evenly and bubble-free into the joint within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€28.39 / 1 Piece)
Ramsauer 131 MULTIFLEX, cement gray , 310 ml
Ramsauer 131 MULTIFLEX, cement gray , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wood, metal as well as plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB), in case of cast resins and in connection with insulating glass please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanized, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiration date of the material, otherwise the mechanical properties of the product as stated can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, cement gray, 310 ml must be applied to the joint uniformly and without bubbles within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. Smoothing work must be carried out within the specified skin forming time. During finishing work, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discoloration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences may lead to discoloration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€20.32 / 1 Piece)
Ramsauer 131 MULTIFLEX, milky transparent , 310 ml
Ramsauer 131 MULTIFLEX, milky transparent , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB). In case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, milky transparent, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€24.19 / 1 Piece)
Ramsauer 131 MULTIFLEX, RAL 9002 gray white , 310 ml
Ramsauer 131 MULTIFLEX, RAL 9002 gray-white , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wood, metal as well as plastic frames. 131 MULTIFLEX is well compatible with VSG foils (PVB), in case of cast resins and in connection with insulating glasses please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanized, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiration date of the material, otherwise the mechanical properties of the product as stated can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, RAL 9002 gray-white, 310 ml must be applied to the joint uniformly and bubble-free within the processing temperature. If the substrate is pretreated with primer, its flash-off time must be observed. Smoothing work must be carried out within the specified skin forming time. During finishing work, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discoloration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences may lead to discoloration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€20.32 / 1 Piece)
Ramsauer 131 MULTIFLEX, transparent , 310 ml
Ramsauer 131 MULTIFLEX, transparent , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with laminated safety glass foils (PVB). In case of cast resins and in connection with insulating glass, please consult our application technology. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, transparent, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks that have formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€28.39 / 1 Piece)
Ramsauer 131 MULTIFLEX, white , 310 ml
Ramsauer 131 MULTIFLEX, white , 310 ml is suitable for sealing single-pane and insulating glass (also in combination with VSG panes) in wooden, metal and plastic frames. 131 MULTIFLEX is well compatible with VSG foils (PVB), please consult our application technology department for cast resins and in connection with insulating glass. Suitable for sealing connection and movement joints. Suitable for mirror joints. 131 MULTIFLEX is a ready-to-use, one-component silicone sealant specially developed for window and door construction. The material is UV, weather and ageing resistant. Very good adhesion, even without primers, to glass as well as many metallic substrates and a variety of plastics. When vulcanised, 131 MULTIFLEX is physiologically harmless and inert. General information: It is imperative to observe the expiry date of the material, otherwise the stated mechanical properties of the product can no longer be guaranteed. Attention must be paid to the ambient and substrate temperature. Pre-treatment of the bonding surfaces: The surfaces to be bonded must be load-bearing, dry and free of dust, oil and grease. If necessary, carefully pre-treat the bonding surfaces using a suitable primer. Joint formation: In the case of movement-compensating joints, the dimensions must be designed for the maximum movement absorption. A minimum joint cross-section of 3x5 mm must be observed. The joints must be formed in accordance with the applicable standards and guidelines. Application of the sealant: Ramsauer 131 MULTIFLEX, white, 310 ml must be applied evenly and bubble-free into the joint within the application temperature. If the substrate is pretreated with primer, its flash-off time must be observed. The smoothing work must be carried out within the specified skin forming time. When finishing, ensure good contact with the bonding surfaces/joint edges (smoothing with Ramsauer smoothing agent). When using smoothing agent, any water streaks formed must be removed immediately after sealing, otherwise visual impairments are to be expected. In combination with some paint systems (e.g. linseed oil varnish, stand oil varnish), discolouration of the sealant may occur. Heavy exposure to tobacco smoke or environmental influences can lead to discolouration. Due to the glaze types offered, a self-adhesion test is required.
Content: 0.31 Piece (€28.39 / 1 Piece)
Ramsauer 135 Object construction, 310 ml
tube contains 310 ml of the sealant, which is sufficient for a wide range of applications. Ramsauer 135 Objektbau is particularly suitable for use on absorbent substrates such as concrete, brick or aerated concrete, but also adheres to non-absorbent substrates such as metal or glass. Due to its high flexibility and resistance to weathering, it is also ideally suited for outdoor use. This sealant is not only resistant to UV radiation, but also to numerous cleaning agents and disinfectants, making it the ideal choice for use in hospitals, schools or public buildings. It is also mould-resistant, making it ideal for damp rooms. Ramsauer 135 Objektbau is free from solvents, silicones and isocyanates and therefore fulfils the highest environmental and health standards. It is also odourless and can therefore also be used in sensitive areas such as children's rooms or bedrooms. To summarise, Ramsauer 135 Objektbau is a versatile, robust and environmentally friendly sealant that is suitable for a wide range of applications in the construction industry.
Content: 0.31 Litres (€26.45 / 1 Litres)
Ramsauer 135 Object construction, 310 ml
tube contains 310 ml of the sealant, which is sufficient for a wide range of applications. Ramsauer 135 Objektbau is particularly suitable for use on absorbent substrates such as concrete, brick or aerated concrete, but also adheres to non-absorbent substrates such as metal or glass. Due to its high flexibility and resistance to weathering, it is also ideally suited for outdoor use. This sealant is not only resistant to UV radiation, but also to numerous cleaning agents and disinfectants, making it the ideal choice for use in hospitals, schools or public buildings. It is also mould-resistant, making it ideal for damp rooms. Ramsauer 135 Objektbau is free from solvents, silicones and isocyanates and therefore fulfils the highest environmental and health standards. It is also odourless and can therefore also be used in sensitive areas such as children's rooms or bedrooms. To summarise, Ramsauer 135 Objektbau is a versatile, robust and environmentally friendly sealant that is suitable for a wide range of applications in the construction industry.
Content: 0.31 Litres (€26.45 / 1 Litres)
- Ramsauer Silikon